MSA White V-Gard Class E, G Type I Polyethylene Standard Slotted Hard Cap With Staz-On Suspension

This type of MSA V-Gard Advance standard slotted hard hat consists of a polyethylene shell and Staz-On Suspension that work together as a protective system. Advance Caps meet or exceed all requirements for a Type I helmet (top impact) as defined in ANSI Z89.1-2003, Class E and G. Not specifically designed to protect against lateral blows from the front, side, or rear.

Cautions:

• MSA's Vanguard Type II protective helmets are so designed and must be used if lateral protection is desired
• Do not mix suspension and helmet size. Make sure the sizes match use only MSA suspensions on an MSA caps or hats. Failure to comply will reduce the energy-absorbing ability of the protective hat or cap.
• Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death
• V-Gard Caps and Hats are not specifically designed to protect against lateral blows from the front, side, or rear

Specification:

• Meet or exceed the applicable requirements for a Type I helmet (top impact) s outlined in ANSI Z89.1 1997,Class E and G

Application:

• Agriculture
• Asbestos Abatement
• Chemical
• Construction
• Domestic Preparedness
• Electric Utility
• Hazardous Materials
• Indoor Air Quality
• Medical
• Mining
• Nuclear
• Oil & Gas
• Paper & Pulp
• Sand Blasting
• Sanding & Grinding
• Spray Painting
• Water/Waste water
• Welding